Course Details
MAHSA University Logo

Bachelor of Mechanical Engineering (Hons)

Offered by: MAHSA University
Add to Educart

Ask About This Course

Your Name
E-mail Address
Phone Number
Date Of Birth
Nationality
Qualification
Message
Are You a Robot?
Course Duration4 Yrs
Part Time/Full TimeFull Time
Fees92520
Fees (International Student)Refer to Univ.
CampusPetaling Jaya Campus
FacultyFaculty of Engineering & Built Environment
Conducted entirely in MalaysiaYes
Level of StudyBachelor's Degree Level
Field of StudyEngineering & Engineering Trades
Stream RequirementsScience Stream
Achievement

Mechanical Engineers play an important role in the future development of a sustainable environment. Engineers have high skill sets of logical thinking and critical analysis, enabling them to think and react professionally and are ready for any future challenges.

The Bachelor of Mechanical Engineering (Hons) is a 4-year programme, designed in consultation with a panel of experts and has been approved by the Engineering Accreditation Council Malaysia (EAC) and Malaysian Qualifications Agency (MQA).

Upon completion of Semester 6, the students will proceed for their industrial training. At the end of the training the students are required to submit a report, while the industries are required to evaluate and report on the students’ job performance. The industrial training is necessary as it is a for accreditation, by the Engineering Accreditation Council of the Board of Engineer Malaysia. Students are exposed to real work environment experience gain knowledge in writing reports in technical works/projects. This programme not only prepares students with advanced theoretical and practical skills but also exposes them to plan and manage a project strategically.

In the final year, this programme offers six (6) elective modules. These electives modules provide the necessary industry application technological skills which are very useful for employment upon graduation. In addition, the students are able to apply relevant engineering skills with strong critical thinking, analysis and teamwork.

Thesis 1 in this programme will enable students to take on Research &Development with commercialization. While Thesis 2 develops the academic and practical aspects of your chosen area of study and reinforces your independent learning skills. This is where you will demonstrate higher level; critical thinking analysis and solutions development skills which will enhance your employability.

Mode of StudyMixed
Course Description

Mechanical Engineers play an important role in the future development of a sustainable environment. Engineers have high skill sets of logical thinking and critical analysis, enabling them to think and react professionally and are ready for any future challenges.

The Bachelor of Mechanical Engineering (Hons) is a 4-year programme, designed in consultation with a panel of experts and has been approved by the Engineering Accreditation Council Malaysia (EAC) and Malaysian Qualifications Agency (MQA).

Upon completion of Semester 6, the students will proceed for their industrial training. At the end of the training the students are required to submit a report, while the industries are required to evaluate and report on the students’ job performance. The industrial training is necessary as it is a for accreditation, by the Engineering Accreditation Council of the Board of Engineer Malaysia. Students are exposed to real work environment experience gain knowledge in writing reports in technical works/projects. This programme not only prepares students with advanced theoretical and practical skills but also exposes them to plan and manage a project strategically.

In the final year, this programme offers six (6) elective modules. These electives modules provide the necessary industry application technological skills which are very useful for employment upon graduation. In addition, the students are able to apply relevant engineering skills with strong critical thinking, analysis and teamwork.

Thesis 1 in this programme will enable students to take on Research &Development with commercialization. While Thesis 2 develops the academic and practical aspects of your chosen area of study and reinforces your independent learning skills. This is where you will demonstrate higher level; critical thinking analysis and solutions development skills which will enhance your employability.

Curriculum
SUBJECTSUBJECT CODE 
Y1S1Engineering Mathematics 1DSM 1013
 Engineering Drawing 1BME 1512
 Materials ScienceBME 1603
 Introduction to C ProgrammingBCT 1013
 Engineering WorkshopBME 1912
 Tamadun Islam dan Tamadun Asia (Local)/ Malaysian Studies (International)MPU3123/MPU3173
Y1S2Engineering Mathematics 2BSM 1023
 StaticsBME 1203
 Engineering MaterialsBME 1613
 Electrical Technology (power & machine)BME 1013
 Engineering Experimentation 1BME 1902
 Hubungan Etnik (Local)/ Bahasa Melayu Komunikasi 2 (International)MPU3113/MPU3143
Y2S3Engineering StatisticsBSM 2013
 Fluid Mechanics 1BME 2303
 Thermodynamics 1BME 2403
 Engineering Drawing 2 (Computer Aided)BME2513
 DynamicsBME 2203
 EntrepreneurshipMPU 3232
Y2S4Numerical MethodsBSM 2023
 Manufacturing ProcessesBME 2703
 Solid Mechanics 1BME 2103
 Introduction to Mechanical DesignBME 2503
 Engineering Experimentation 2BME 2902
 Youth DevelopmentMPU 3322
Y3S5Engineering Electronics & MicroprocessorsBME 3013
 Measurements & InstrumentationBME 3023
 Fluid Mechanics 2BME 3303
 Thermodynamics 2BME 3403
 Community ServiceMPU 3342
 Multimedia ApplicationBCT 3013
Y3S6Control EngineeringBME 3033
 Solid Mechanics 2BME 3103
 Mechanics of Machines & VibrationsBME 3203
 Component DesignBME 3503
 Engineering Experimentation 3BME 3902
 Creativity and InnovationBCT 3023
 Industrial Training (8 weeks)BME 3914
Y4S7Thesis 1BME 4002
 Industrial EngineeringBME 4803
 System DesignBME 4503
 Elective 1BME 4XX3
 Elective 2BME 4XX3
Y4S8Thesis 2BME 4004
 Engineers in SocietyBME 4833
 Engineering Management, Economics & SafetyBME 4813
 Elective 3BME 4XX3
 Elective 4BME 4XX3
TECHNICAL ELECTIVES
 Vibration, Measurement & ControlBME 4213
 Acoustic and Noise ControlBME 4223
 Material ProcessingBME 4613
 Material SelectionBME 4653
 Nano-MaterialBME 4673
 Production Planning & ControlBME 4823
 RoboticsBME 4013
 Refrigeration & Air-ConditioningBME 4423
Entry Requirements
  • DIPLOMA/MATRICULATION/FOUNDATION
    Related field pass with min. CGPA 2.0
  • STPM
    Pass with min. Grade C (CGPA 2.0) in three (3) subjects including Mathematics and one (1) Science subject
  • A-Level
    Pass in three (3) subjects including Mathematics and one (1) Science subject
  • UEC
    Pass with Grade B in five (5) subjects including Mathematics and one (1) Science subject
  • OTHER
    Recognised Malaysian qualifications or their equivalent
  • ENGLISH PROFICIENCY
    MUET: BAND 2
    IELTS: 5.0
    TOEFL: 500
Intake Months

April/Oct

Career Prospects
  • Design Engineer
  • Engineer in multiple fields
  • Mechanical Contractors
  • Quality Control and Assurance Engineers
  • Manufacturing and production sector engineer
  • Mechanical Engineer

All fees are in RM (Ringgit Malaysia) currency unless stated otherwise.


Other Courses in this Level of Study Other Courses in this Field of Study

Back to Courses

Download FREE myCourseGuide
马来西亚的高等教育机会